BS EN 274-3-2002 卫生器具用废水管道连接件.质量控制
时间:2024-05-19 09:01:48 来源: 标准资料网 作者：标准资料网 阅读：8685
【英文标准名称】:Wastefittingsforsanitaryappliances-Qualitycontrol
【原文标准名称】:卫生器具用废水管道连接件.质量控制
【标准号】:BSEN274-3-2002
【标准状态】:现行
【国别】:英国
【发布日期】:2002-09-04
【实施或试行日期】:2002-09-04
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:Thisstandardspecifiestherequirementsforqualitycontrolforwasteoutlets,trapsandoverflowsforkitchensinks,showertrays,washbasins,bidetsandbathswhichareconnectedtogravitydrainagesystems,whateverthepurposeofthebuilding,toensureconformityoftheseproductswithEN274-1.
【中国标准分类号】:Q81
【国际标准分类号】:91_140_70
【页数】:12P;A4
【正文语种】:英语
【英文标准名称】:StandardPracticeforClassifyingHighwayVehiclesfromKnownAxleCountandSpacing
【原文标准名称】:根据已知的车轴计数和间距对公路车辆进行分类的标准规范
【标准号】:ASTME1572-1993
【标准状态】:作废
【国别】:
【发布日期】:1993
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:E17.52
【标准类型】:(Practice)
【标准水平】:()
【中文主题词】:运载工具;间距;车轴配置;根据已知的车轴计数进行分类;公路车辆;单元配置;规程;分类标准
【英文主题词】:Axleconfiguration;Classification(standards);Highwayvehicles;Unitconfiguration;Vehicles;highwayvehicles-classifyingfromknownaxlecount/spacing,practice
【摘要】:1.1Thispracticecoverstheclassificationofhighwayvehiclesintocategoriesrelatingtoaxleorunitconfiguration.1.2Traditionally,observershaveclassifiedvehiclesvisually.Becauseofcost,safetyconsiderations,andtheneedforni
【中国标准分类号】:T04
【国际标准分类号】:03_220_20
【页数】:19P.;A4
【正文语种】:
Product Code:SAE J700
Title:Upper Coupler Kingpin--Commercial Trailers and Semitrailers
Issuing Committee:Truck And Bus Total Vehicle Steering Committee
Scope:This SAE Standard applies to upper coupler kingpins for commercial trailers and semitrailers in the unladen condition. See Figure 1. A 90 degree ± 1 degree angle extends (in all directions) from the centerline of the kingpin to the upper coupler plate surface within a 48.26 cm (19 in) radius. The upper coupler plate surface should not bow downward (convex) more than 0.635 cm (1/4 in) within a 48.26 cm (19 in) radius or more than 0.3175 cm (1/8 in) at a radius of 25.4 cm (10 in) from the kingpin. The upper coupler plate surface should not bow upward (concave) more than 0.15875 cm (1/16 in) within a 48.26 cm (19 in) radius. (See Figure 2.)NOTE--For recommended performance, see SAE J133.